Plumbers in Bristol

Home / Services / Plumbers in Bristol

NEED A PLUMBER IN BRISTOL & SURROUNDING AREA’S? NO PROBLEM!

RM Plumbing & Electrical have built an excellent reputation throughout Wales and due to our demand increasing across into England we have now expanded and opened our new office in Bristol. Our Bristol plumbers are highly experienced tradesmen who are fully qualified with the City and Guilds of London Institute.

RM Plumbing & Electrical only employ fully trained NVQ qualified plumbers who are Gas Safe plumbing engineers in Bristol. We regularly deal with all sorts of plumbing requirements from our customers.

We understand how vital it is that you have potable water running through your pipes to ensure your public health. Our Plumbers in Bristol are on call 24 hours a day as an emergency call out service, so if you need an emergency plumber in Bristol you know that you can rely on us as a fast and reliable service.

We can help you with any sewerage or drainage problems at your property and we can identify and solve any safety issues with our expert knowledge and experience. We have 100’s of genuine Google reviews from happy customers who use us again and again.

SERVICES IN BRISTOL

Plumbers in Bristol

In the developed world that we live in, plumbing infrastructure is vital for public health and sanitation. We have a range of tools and equipment in our fleet of vans which we use as Plumbers in Bristol and the surrounding areas.

Plumbing is essentially any type of system that conveys fluids for a variety of different reasons. We use a huge variety of pipes, valves, plumbing fixtures, tanks and other equipment to achieve success in delivering our expert plumbing services in Bristol.

Our Plumbers in Bristol will replace any type of compression fittings or threaded fittings that may be faulty in your home or premises and all of our work complies with UK building regulations.

We are not boilermakers but we can install new boilers and replace or repair old boilers. We use various types of piping depending on the job.

Some jobs only require some soldering or replacing some steel piping, other jobs will require some fault identification on a heating and cooling system. Whatever your problem is our Plumbers in Bristol are on hand to help.

We can install new or replace old water tanks and clean out sewerage systems and septic tanks. We deal with absolutely any type of plumbing job from hot water heat recycling to piping and plumbing fittings.

If you can hear loud noises coming from your pipes inside your property or premises then there are a few possible causes for this.

The first possible cause could be a faulty ball valve but this type of noise is not a banging noise. The noise you will hear from these will sound like a horn! If you want one of our plumbers in Bristol to check this for you, RM Plumbing & Electrical will replace the faulty ball valve for you.

Other causes could be that your pipes might not be clipped together properly. If this happens then your pipes can bang against the wall or on the floorboards.

Another cause could be air being trapped in the stop tap. This can cause your pipes to vibrate loudly and create a banging sound. Loose washers or seals in the stop tap can also cause the same problems. If you experience any of these issues and live in Bristol or the surrounding areas then call our RM Plumbing & Electrical Plumbers in Bristol and we will deliver a fast and efficient service that will exceed your expectations.

There are many sources of leaks but the most common sources are dripping taps, toilets, radiators, showers and pipework. It is a good idea to look for leaks in poorly plumbed appliances and overflows from water tanks in the cistern and the loft. If you have any outdoor taps then check that they are not dripping.

It is important to know that some leaks can be hidden from view and if you are on a water meter and your water bill comes in a lot higher than usual then more than likely you have a leak somewhere in your premises.

There is a way to check this if you have a water meter. Firstly, turn off all of the taps and all appliances that use water in the premises.

Wait around 30 minutes to let all the tanks and all the cisterns fill up with water.

Then go to the water meter and write down the meter reading in full.

Wait a few hours or overnight making sure that no water is used during that time and take another reading. It should be the same of the first.

If the reading is higher,  it is very possible that there is a leak in your property.  RM Plumbing & Electrical want to help our customers understand their water meter usage. Here is a link to Bristol Waters guide to your water and your water meter. There are times when our Bristol customers may need to phone their water supplier for some leaks so please read their guide thoroughly. It points out when you will need to ring them but for all other plumbing issues, please feel free to ring our Plumbers in Bristol for a fast and efficient response.

Common plumbing problems:

  •     Boiler breakdowns
  •     Faulty valves
  •     Leaking pipes or radiator valves
  •     Float valves replaced
  •     Isolation valves
  •     New taps Installed
  •     Toilets (of any age we can find the part to get it working again)
  •     Tanks
  •     Overflows
  •     Washing machines
  •     Immersion Heaters replaced or repaired
  •     Dishwashers Installed
  •     Hot water cylinders
  •     Pumps (whole house pumps, Central heating pumps, Low mains pressure booster pumps)
  •     Showers (Electric, Thermostatic)
  •     Power flushing
  •     Blocked drains

These are just a few of the many plumbing services we aim to provide please contact us directly by phone or email.

the web designer group uk
the web designer group logo

Close Button

Web Site Designed by

The Web Designer Group